Is this a Kalmaker?

[Troy5L]

Hey guys,
i brought a 2nd hand supercharger kit, but in the kit he gave me was a "kalmaker" that he told me he brought for $1250 from CVE performance in hallam and he got them to tune it aswell..the last owner has no idea if its a kalmaker or what model it is. here is some pics..



on the 'kalmaker" its has a sticker that says WDS164S and also has 'Delco memory board' on it..

Is this a Kalmaker and if so what model is it..

Thanks alot troy

[stormtrooper]

Don't take this as gospel ok. To me it looks like it could be but I am not sure. Mine has more boards in that assembly so if it is a kalmaker I would suggest it isn't complete.

By the look of the connector it is a VN-VR model (808 basically) the later ones had a much smaller connector.

[DerekBell]

I agree with Stormtrooper. I havent seen one of those before, but it basically looks like a RT board, it has the SRAM, the small PAL, and the resistor packs.

I would assume that it would be an early model (Early SP2 etc), but the only person who woujld likely be able to answer this would be Hooter.. Drop him a message..

Derek

[Hooter]

Interesting........, any ideas Kojab?????
This is defineately not a Kalmaker piece
It is a cheap crap board based on a Kalmaker set up
I would like to know where it came from, especially the PAL
The WDS164S says it is a 2bar V8 auto (VR/VS) PAL,

This is a serious Copyright breach, and I would pay money for any proof of where this came from

[kojab]

The only other PCB that I have seen that looks similar to the Kalmaker SP2/3 development board was the twin map board sold by COME. Al you mentioned sometime back that you knew of some one who was copying and selling them but I have never seen any.

Have you spoken to CVE performance in hallam Vic? Troy5L said they tuned it as well.